RESPECTING THE ENVIRONMENT

​The E215B is compliant with European Directives concerning electromagnetic compatibility and noise level. The emissions of the new Tier 3A CNH engine have been dramatically reduced and are, as shown below, much lower than standard requirements.
CO: 0.77, HC: 0.08, NOx: 3.59, Particulate: 0.13 (*)

In addition, this engine can use normal diesel, with up to 20% of Biodiesel added...a real Environmentally Friendly machine.
(*) all data are expressed in g/kWh

EFFICIENCY AND CONTROLLABILITY

​To obtain a Hydraulic System which is much more efficient, controllable, fast and powerful, and which consumes less fuel than previously, New Holland engineers have been working not only on pumps but also on a completely redesigned and refined Control Valve adding a second arm spool, larger radius pipings with SAE flange ports, increased swing output torque and new working mode selection functions.

Movements speed has been increased and machine controllability improved, especially on operations that require combined movements.
This outstanding characteristic is further enhanced by the new H.A.O.A. Control.

TOP DESIGN & PRODUCTION TECHNOLOGIES

​Booms and Arms have been redesigned using advanced CAD (Computer Aided Design) and FEM (Finite Elements Methodology) Systems to get higher strength only in those areas where stresses are concentrated.
These sophisticated design methodologies are combined with the most advanced production technologies, providing high tensile steel plates that are cut, assembled and welded at the New Holland plant, which since many years holds the prestigious "Vision 2000" Quality Certification.

The result is a lighter but stronger Heavy Duty front attachment to load more earth...and less "dead" iron.

The same innovative guidelines, to achieve Heavy Duty maximum strength together with outstanding torsional and flexional resistance, are applied in design and manufacture of upper stucture and the undercarriage.

NEW COMFORTABLE SEAT

New comfortable contoured seat which can be adjusted in all directions and back and forth, together with or independently of side consoles.

The armrests, integrated on side consoles, can be lifted/lowered into four different positions and inclined, enabling the operator to set the correct position for maximum convenience and comfort.

CLEAN AND ACCESSIBLE LAYOUT

​The new machine layout has been designed to make inspections, maintenance and servicing much easier and less time-consuming.
The engine oil filter, the fuel filters and the water separator are remote mounted and easy to reach from ground level.
Both the fuel filters and the water separator, which removes contaminants and water, have an important function for engine performance and durability.
Cooling components (radiator, hydraulic oil cooler and intercooler) are now mounted in parallel, which means increased cooling efficiency for higher component reliabilty whilst being easier to check and clean.